Medical PVCPelletSample available

Benvic MED CR 70

Grade: CR 70

Overview

DEHP-free flexible PVC compound plasticized with TOTM for fluid-path tubing. Replaces legacy DEHP formulations without giving up the clarity, kink resistance and solvent bondability that made medical PVC dominant.

Key advantages
  • DEHP free
  • Solvent bondable
  • Clear
Applications
IV administration setsBlood bagsFluid path tubing

Technical datasheet

15% verified(14/94)

This grade's datasheet has not been ingested yet. The structure below is complete, and each value fills in as we transcribe the producer technical data sheet and our engineering team reviews it. Nothing here is invented to fill the gap.

Identification

Producer part number
CR 70
Nexeo material code
Awaiting datasheet
Resin family
Medical PVC
Abbreviation
Awaiting datasheet
Color
Awaiting datasheet
Grade status
Awaiting datasheet

Technical properties

Producer datasheetNexeo Applications Engineering assessmentAwaiting datasheetNot published by producer
Physical properties for Benvic MED CR 70, with value, unit, test method and conditions
PropertyValueUnitTest methodConditions
Density1.21g/cm3ISO 118323 °C
Specific GravityAwaiting datasheet—ASTM D79223 °C
Melt Flow RateAwaiting datasheetg/10 minISO 1133—
Melt Volume RateAwaiting datasheetcm³/10 minISO 1133—
Water Absorption (24 h)Awaiting datasheet%ISO 6223 °C, immersion
Water Absorption (equilibrium)Awaiting datasheet%ISO 6223 °C, saturation
Moisture Content at MoldingAwaiting datasheet%ISO 15512max before processing
Mold Shrinkage (flow)Awaiting datasheet%ISO 294-460 × 60 × 2 mm plaque
Mold Shrinkage (cross-flow)Awaiting datasheet%ISO 294-460 × 60 × 2 mm plaque
Bulk DensityAwaiting datasheetkg/m³ISO 60as-supplied pellet

1 of 10 physical properties verified against a producer datasheet.

Source: pending verification — awaiting Benvic technical data sheet.

15% verified · 14 of 94 properties confirmed against a producer datasheet.

Typical values for reference only — not a specification. Confirm against the current producer datasheet before designing to these numbers.

Chemical resistance

Producer datasheetNexeo Applications Engineering assessmentAwaiting datasheetNot published by producer

Chemical compatibility for this grade has not been assessed yet. Ratings are added as our applications engineering team reviews each resin family.

Ratings describe the resin's general behaviour, not your part. Moulded-in stress, wall section, temperature and applied load all change the outcome — qualify the finished device with your own cleaning and exposure protocol.

Sterilization compatibility

Producer datasheetNexeo Applications Engineering assessmentAwaiting datasheetNot published by producer
Sterilization method compatibility for Benvic MED CR 70
MethodCompatibleMax dose / cyclesProperty retentionDiscoloration
Gamma irradiationCompatibleConfirm with producerAwaiting assessmentAwaiting assessment
E-beamCompatibleConfirm with producerAwaiting assessmentAwaiting assessment
X-rayAwaiting assessmentConfirm with producerAwaiting assessmentAwaiting assessment
Ethylene oxideCompatibleConfirm with producerAwaiting assessmentAwaiting assessment
Steam autoclaveAwaiting assessmentConfirm with producerAwaiting assessmentAwaiting assessment
Vaporized hydrogen peroxideAwaiting assessmentConfirm with producerAwaiting assessmentAwaiting assessment
Dry heatAwaiting assessmentConfirm with producerAwaiting assessmentAwaiting assessment

Maximum dose and cycle counts require producer validation data, so we show "Confirm with producer" rather than a figure. Retention and discoloration notes are qualitative. Sterilization must always be validated on the finished device.

Regulatory & compliance

  • USP Class VIYes
  • ISO 10993-1 (biological evaluation)Yes
  • ISO 10993-4 (blood interaction)Yes
  • ISO 10993-5 (cytotoxicity)Yes
  • ISO 10993-6 (implantation)Yes
  • ISO 10993-10 (irritation / sensitization)Yes
  • ISO 10993-11 (systemic toxicity)Yes
  • FDA Drug Master FileAwaiting confirmation
  • EU MDR statusAwaiting confirmation
  • Food contact statusAwaiting confirmation
  • REACH SVHCAwaiting confirmation
  • RoHSAwaiting confirmation
  • Animal-derived-free / TSE-BSEAwaiting confirmation
  • DEHP-freeAwaiting confirmation
  • Phthalate-freeAwaiting confirmation
  • BPA-freeAwaiting confirmation
  • Latex-freeAwaiting confirmation
  • California Prop 65Awaiting confirmation

Compliance status reflects producer statements and grade records on file. Always confirm the current position with a signed regulatory statement letter for your specific device and market before submission.

Documents

Documents marked “Request” are supplied on account. We link a download only when a real, current file is on file — never a placeholder that would 404.

Supply & logistics

Stocking, lead time and packaging for this grade are confirmed per order. Request a quote and the team responds with live availability rather than a figure that may be stale.

Processing & design notes

Primary process

Injection or extrusion

Supplied in grades suited to both molding and profile or tube extrusion — confirm the specific grade with the datasheet.

Structural role

Flexible compound — traditional medical tubing and fluid-handling sets.

Typically paired with

  • Complementary grades from the same resin family

Engineering watch-outs

  • Verify heat-deflection temperature against your autoclave cycle before assuming steam compatibility.
  • Plasticizer selection drives both flexibility and extractables — confirm DEHP status against your market requirements.
  • Always qualify the specific lot and grade against your own device master record and validation plan.

Qualitative guidance only. We don't publish processing windows — confirm melt and mold temperatures, drying, and shrinkage against the producer technical data sheet and your own part qualification.

Supplier
Benvic
Certifications
USP Class VI, ISO 10993, EP 3.1.1.1

Test Benvic MED CR 70 in your next build

Order this grade directly, or request a qualification sample first. Our team confirms availability, documentation, and shipping on every order.

Ask the AI copilot

Quote on request

Specialty grade — pricing varies by volume and lead time

In stock

All orders are reviewed by our sourcing team. Final pricing, lead time, and documentation (CoA, SDS) are confirmed before fulfillment.